- Auto Suspension Spring
- 2017-12-30 05:57
- This is applied to Auto Shock Absorber, we have more than 300 OEM numbers now and all are made by CNC to guarantee the quality and service life, the main material used is 55CrSi.
- Railway Locomotive Spring
- 2017-12-08 23:20
- This is applied to Railway locomotive and it is made with alloy material with good fatigue performance. The diameter is between 20mm and 55mm.
- Common Tesnsion Spring
- 2017-12-07 05:26
- This is applied to Auto parts, gym equipment, Mechanical equipment, etc. We can make all kinds of hook ring shaped tension springs with various surface treatment.
- Shaped Steel Wire Products
- 2017-11-22 22:37
- This is made by multifunctional CNC and we can produce complex shaped spring, and the material used are Carbon steel wire, alloy steel wire and stainless steel wire, etc.
- Mining Equipment Spring
- 2017-10-28 12:29
- This is applied to mining machinery and equipment, Conveying machinery and vibrating screen. The wire diameter is between 20mm and 55mm.
- Elevator Accessories Spring
- 2017-10-21 21:48
- It is applied to elevator buffer, which is the most important part of elevator accessories. In order to ensure the quality, this kind spring must be with the treatment of shot peening and flaw detection.
- Exhaust Pipe Spring
- 2017-10-18 20:38
- This is applied to the vehicle exhaust pipe , the material used is stainless steel to prevent rusty.
- High Temperature Resistant Spring
- 2017-10-17 03:53
- This kind of spring is made with Inconel x-750 and Inconel x-718, it can be high temperature resistance of 700 degree and also corrosion resistance, it has a high Fatigue resistance.
- Galvanized Spring
- 2017-10-12 10:45
- Plating coating on common spring ‘s surface to improve the quality of the surface and also increase the anti-rusty ability.
- Wave Spring
- 2017-10-11 03:32
- It is applied to electric machinery and hydraulic equipment, the HRC is between 44 and 46 and the main material used are 65Mn, 50CrVA, 0Cr17Ni7AL, SUS304L and SUS316L.
- Common Disc Spring
- 2017-09-27 19:19
- It is made with alloy material with the Characteristic of short working stroke, large load, small space occupied, high safety and long service life, the main material used are 50CrVA and 60Si2MnA with diameter maximum 280mm.
- Engine Valve Spring
- 2017-09-25 18:15
- This is made by CNC to ensure the consistency of the spring’s workload, and also with the technique of shot blasting to guarantee the service life to be more than 25 million times.
- Forage Machinery Spring
- 2017-09-20 15:01
- It is mainly applied to all kinds of harvester, the surface treatment are electrophoresis, spraying plating, zinc-plating.
- Stainless Steel Disc Spring
- 2017-08-17 15:37
- This is made with stainless steel 316L and 304L, It can be applied to poor working environment to increase the anti-rust service life.
- Variable-rate Suspension Spring
- 2017-08-07 18:05
- This is applied to the vehicle which has special requirement for damping performance, it is made by special moulds with special material, the wire used is taper in both ends and fat in central.
- Die Spring Series
- 2017-08-05 23:57
- It is mainly applied to mold and is made with rectangular wire, which is has large stiffness than round wire spring and also has the characteristic of small occupied space.
- Standed Wire Spring
- 2017-07-09 00:34
- It is mainly applied to important parts, which can effectively solve the effect of impact load on the spring with a long service life.
